This is my 3rd Iron-A-Way. My first was installed in the laundry room of the basement in an old house in St. Louis, MO. The second was in a 3000+ square foot house in a huge walk-in closet. My third and current one was installed in the sewing room of our beach home where my ancestors jealously observe that I sew and press with elegant convenience!
Not only is it convenient to store your iron inside the unit, but the location keeps the iron out of children’s reach. There’s no reason to let your iron cool down, the insulated heat shield allows for immediate shelving.
The hot iron storage area provides a shelf that is 7 1/2″ wide, 12 1/2″ high, and 4 3/8″ deep on the right side of the top shelf for storing your iron.
The hot iron storage area has been designed to accept the majority of steam/dry irons available at retail, including many premium models.
Are you looking for the optimal freedom in board usage? A swivel board allows for a 90 degree left/right turn of the board creating the flexibility that may be necessary in confined areas.
Do you like ironing off the back of the board rather than the nose of the board? The swivel mechanism allows for the board to extend out of the cabinet and then turn left or right; this allows the back end of the board to be accessible and you now have the choice to iron off it.
This feature is standard on all models numbers beginning with an “A” which defines “Adjustable Swivel”.
Our metal ventilated board differentiates itself from the earlier wooden ironing boards. The traditional built-in wooden board only needed to be hard for the dry irons of the day. Today’s advanced steam irons are designed to project bursts of steam to penetrate deep into the fabric. This allows for removing wrinkles with less effort. Yet, using them on a wooden ironing board caused a build-up of condensation on the board and hot spots when ironing. Our metal ventilated board allows steam to pass through the fabric keeping the surface dryer and providing a more even-heated ironing surface.
These features allow for only the amount of cord required to iron by using the electrical cord cover or wrap. You can easily guide the iron and eliminate the excess cord from getting in your way.
These features are standard on all models numbers containing an “E” which defines “Electrical”. The 60″ cabinets will contain the electrical cord cover and the 52″ cabinets will contain the cord wrap.
Do you want to create an environment that provides optimal surroundings when ironing out all the wrinkles?
When ironing garments in insufficiently lighted areas, our spotlight will enhance your ability to iron out those sometimes not found hard to spot creases and crevices.
This feature is standard on all models numbers containing an “E” which defines “Electrical”.
The garment bar is helpful when you have more than just a few garments to iron.
The garment bar can hold multiple clothes hangers, making it more convenient to perform continuous ironing.
No place to leave your iron when moving or turning your garment?
Place the iron in this handy heat resistant iron rest. This allows for more useable space on the ironing board while making your garment adjustments.
This features is standard on all models, excluding the IAW-42.
Storage is not a problem with our ironing centers!
All models will include an additional storage shelf, our 60″ wood cabinets include two storage shelves.
Keep all your ironing aids in one handy location!
No reason to worry if you’re temporarily called away or unable to continue your ironing!
The silent motor timer offers safety and convenience. Just set the dial to the desired time. The On/Off indicator will let you know the power is on. Power shuts off automatically once the time has expired. If you’re called away, just place your hot iron into the hot iron storage and lift the board into the upright position, the electrical safety switch disconnects power instantly.
This feature is standard on all models numbers containing an “E” which defines “Electrical”.