No place to leave your iron when moving or turning your garment?
Place the iron in this handy heat resistant iron rest. This allows for more useable space on the ironing board while making your garment adjustments.
This features is standard on all models, excluding the IAW-42.
The kit is necessary if planning to surface mount rather than installing in between studs
60” Surface Mount Kit used for Models AE-46, E-46, NE-46 and UD-42
52” Surface Mount Kit used for Models AE-42, E-42, and NE-42
No Surface Mount Kit necessary for Model IAW-42
Surface Mount Kit finishes out back sides of unit for flush finish
Wood pieces can be stained or painted to match cabinet
Unit will protrude approximate 7” to 8” rather than 3” – 4” depending on which model purchased
Shipping method: UPS Ground – Allow 5-7 days for delivery if ordering Surface Mount Kit only
Price Includes shipping in the continental US
The sleeveboard is placed on top of the main board and used when you want to iron sleeves or smaller garments that won’t fit over the nose of your regular ironing board.
When in use, the sleeveboard rests on top of the main ironing board and is self-supporting. Customer-installed holding bracket provided for storage inside the unit. Please note: Sleeveboard is not able to install inside the IAW-42 and must be stored separately, outside the unit.
The Maytag Smart Fill – M800 is a trendy iron and steamer in one. The innovative removable water tank allows you to fill it while the iron is heating. Heating takes less than one minute with the new speed heat technology.
The iron’s innovative controls for water spray and steam surge provides dramatic results. The stainless steel sole plate enables the smoothest glide and the 360 degree tangle free cord offers the ultimate freedom of motion. This iron’s quality, design, and function will compliment your IRON-A-WAY ironing center.
Door Hardware is included on all No Door selections and will include a Garment Bar, Roller Catch, and Piano Hinge.
Wood Flat (Unfinished Maple Veneer)
Black Metal Door Overlay
Charcoal Metal Door Overlay
White Metal Door Overlay
Biscuit Metal Door Overlay
Stainless Steel Door Overlay
All models come standard with a wood door.
Metal Door Overlays come painted and ready to install over the standard wood door.
Metal Door Overlay attaches to front of wood door with permanent mounting tape.
Models comes with a choice of eight different door styles. The standard Flat Maple Veneer, Raised Maple, Raised Pine, and Raised Oak door styles are unfinished and ready to accept paint or stain.
The Flat White and Raised White are pre-finished and not able to be pained/stained.
The Mirror Door is full length, 1/4″ plated glass with polished edge. Please note that the Mirror Door is shipped separate for added protection.
To add your own custom door, you can order the No Door option, which comes standard with hinge hardware including Piano Hinge, Roller Catch Assembly, and Garment Bar.
Oak Raised
Pine Raised
Maple Raised
White Flat
White Raised
Mirror
Do you want to create an environment that provides optimal surroundings when ironing out all the wrinkles?
When ironing garments in insufficiently lighted areas, our spotlight will enhance your ability to iron out those sometimes not found hard to spot creases and crevices.
This feature is standard on all models numbers containing an “E” which defines “Electrical”.
The garment bar is helpful when you have more than just a few garments to iron.
The garment bar can hold multiple clothes hangers, making it more convenient to perform continuous ironing.
This feature is standard on all other models except the IAW-42.
These features allow for only the amount of cord required to iron by using the electrical cord cover or wrap. You can easily guide the iron and eliminate the excess cord from getting in your way.
These features are standard on all models numbers containing an “E” which defines “Electrical”. The 60″ cabinets will contain the electrical cord cover and the 52″ cabinets will contain the cord wrap.
No place to leave your iron when moving or turning your garment?
Place the iron in this handy heat resistant iron rest. This allows for more useable space on the ironing board while making your garment adjustments.
This features is standard on all models, excluding the IAW-42.
Storage is not a problem with our ironing centers!
All models will include an additional storage shelf, our 60″ wood cabinets include two storage shelves.
Keep all your ironing aids in one handy location!
No reason to worry if you’re temporarily called away or unable to continue your ironing!
The silent motor timer offers safety and convenience. Just set the dial to the desired time. The On/Off indicator will let you know the power is on. Power shuts off automatically once the time has expired. If you’re called away, just place your hot iron into the hot iron storage and lift the board into the upright position, the electrical safety switch disconnects power instantly.
This feature is standard on all models numbers containing an “E” which defines “Electrical”.
Not only is it convenient to store your iron inside the unit, but the location keeps the iron out of children’s reach.
There’s no reason to let your iron cool down, the insulated heat shield allows for immediate shelving.
The hot iron storage area has been designed to accept the majority of steam/dry irons available at retail, including many premium models.
Are you looking for the optimal freedom in board usage? A swivel board allows for a 90 degree left/right turn of the board creating the flexibility that may be necessary in confined areas.
Do you like ironing off the back of the board rather than the nose of the board? The swivel mechanism allows for the board to extend out of the cabinet and then turn left or right; this allows the back end of the board to be accessible and you now have the choice to iron off it.
This feature is standard on all models numbers beginning with an “A” which defines “Adjustable Swivel”.
Our metal ventilated board differentiates itself from the earlier wooden ironing boards. The traditional built-in wooden board only needed to be hard for the dry irons of the day. Today’s advanced steam irons are designed to project bursts of steam to penetrate deep into the fabric. This allows for removing wrinkles with less effort. Yet, using them on a wooden ironing board caused a build-up of condensation on the board and hot spots when ironing. Our metal ventilated board allows steam to pass through the fabric keeping the surface dryer and providing a more even-heated ironing surface.
Reviews
There are no reviews yet.