Hinge side is as you are facing the unit. Example: A right hand hinge opens from the left to the right, with the actual hinge on the right side of the cabinet when facing the unit.
Hinge Side
Optional Features ?
Perfect for use in new construction or remodel prior to drywall being installed, the Rough-In Kit provides a template to install drywall around, leaving the perfect hole to install your ironing center.
Rough-In Kit
?
A smaller, additional ironing board designed for the sleeves of a shirt. Hardware is provided to install a holding bracket inside the unit.
Sleeveboard
?
Trim required to finish the sides of the unit when surface mounting instead of recessing between studs. Trim pieces can be stained or painted to match cabinet.
Surface Mount Kit
?
A perfect accessory to your new ironing center, the Maytag M800 is a premium two in one steamer and iron.
Maytag Steam/Iron - M800
?
Installing on the second shelf, the hot iron rest provides the perfect place to set your iron while adjusting garments, preventing possible scorches and burns.
No place to leave your iron when moving or turning your garment?
Place the iron in this handy heat resistant iron rest. This allows for more useable space on the ironing board while making your garment adjustments.
This feature is standard on all 46″ ironing boards and Model UD-42.
Rough-In Kit
Surface Mount Kit
The kit is necessary if planning to surface mount rather than installing in between studs
60” Surface Mount Kit used for Models AE-46, E-46, NE-46 and UD-42
52” Surface Mount Kit used for Models AE-42, E-42, and NE-42
No Surface Mount Kit necessary for Model IAW-42
Surface Mount Kit finishes out back sides of unit for flush finish
Wood pieces can be stained or painted to match cabinet
Unit will protrude approximate 7” to 8” rather than 3” – 4” depending on which model purchased
Shipping method: UPS Ground – Allow 5-7 days for delivery if ordering Surface Mount Kit only
Price Includes shipping in the continental US
Sleeveboard
The sleeveboard is placed on top of the main board and used when you want to iron sleeves or smaller garments that won’t fit over the nose of your regular ironing board.
When in use, the sleeveboard rests on top of the main ironing board and is self-supporting. Customer-installed holding bracket provided for storage inside the unit. Please note: Sleeveboard is not able to install inside the IAW-42 and must be stored separately, outside the unit.
Maytag Steam/Iron - M800
The Maytag Smart Fill – M800 is a trendy iron and steamer in one. The innovative removable water tank allows you to fill it while the iron is heating. Heating takes less than one minute with the new speed heat technology.
The iron’s innovative controls for water spray and steam surge provides dramatic results. The stainless steel sole plate enables the smoothest glide and the 360 degree tangle free cord offers the ultimate freedom of motion. This iron’s quality, design, and function will compliment your IRON-A-WAY ironing center.
Door Hardware
Door Hardware is included on all No Door selections and will include a Garment Bar, Roller Catch, and Piano Hinge.
Metal Door Overlay Selections
Wood Flat (Unfinished Maple Veneer)
Black Metal Door Overlay
Charcoal Metal Door Overlay
White Metal Door Overlay
Biscuit Metal Door Overlay
Stainless Steel Door Overlay
All models come standard with a wood door.
Metal Door Overlays come painted and ready to install over the standard wood door.
Metal Door Overlay attaches to front of wood door with permanent mounting tape.
Additional Door Options
Models come standard with a flat maple veneer door. All wood doors come unfinished and can be stained or painted to match your decor.
White doors do not require finishing.
Mirror is full length, 1/4″ plated glass with polished edge. Mirrored door is shipped separate for added protection.
No door option is available to match your cabinetry. Keep in mind the door hardware is not included when ordering a “No Door.” This consists of the Piano Hinge, Roller Catch Assembly, and Garment Bar. If you would like a “Door Hardware Kit,” add them by choosing this option within the Optional Features section.
Oak Raised
Pine Raised
Maple Raised
White Flat
White Raised
Mirror
Built-in Spotlight
Do you want to create an environment that provides optimal surroundings when ironing out all the wrinkles?
When ironing garments in insufficiently lighted areas, our spotlight will enhance your ability to iron out those sometimes not found hard to spot creases and crevices.
This feature is standard on all models numbers containing an “E” which defines “Electrical”.
Garment Bar
The garment bar is helpful when you have more than just a few garments to iron.
The garment bar can hold multiple clothes hangers, making it more convenient to perform continuous ironing.
This feature is standard on all other models except the IAW-42.
Electrical Cord Cover with Restraint (not shown) or Electrical Cord Wrap with Restraint (shown)
These features allow for only the amount of cord required to iron by using the electrical cord cover or wrap. You can easily guide the iron and eliminate the excess cord from getting in your way.
These features are standard on all models numbers containing an “E” which defines “Electrical”. The 60″ cabinets will contain the electrical cord cover and the 52″ cabinets will contain the cord wrap.
Hot Iron Rest
No place to leave your iron when moving or turning your garment?
Place the iron in this handy heat resistant iron rest. This allows for more useable space on the ironing board while making your garment adjustments.
This feature is standard on all 46″ ironing boards and Model UD-42.
Storage Shelves
Storage is not a problem with our ironing centers!
All models will include an additional storage shelf, our 60″ wood cabinets include two storage shelves.
Keep all your ironing aids in one handy location!
60 Minute Silent Motor Timer
No reason to worry if you’re temporarily called away or unable to continue your ironing!
The silent motor timer offers safety and convenience. Just set the dial to the desired time. The On/Off indicator will let you know the power is on. Power shuts off automatically once the time has expired. If you’re called away, just place your hot iron into the hot iron storage and lift the board into the upright position, the electrical safety switch disconnects power instantly.
This feature is standard on all models numbers containing an “E” which defines “Electrical”.
Hot Iron Storage
Not only is it convenient to store your iron inside the unit, but the location keeps the iron out of children’s reach.
There’s no reason to let your iron cool down, the insulated heat shield allows for immediate shelving.
The hot iron storage area has been designed to accept the majority of steam/dry irons available at retail, including many premium models.
90 Degree Left/Right Swivel Option
Are you looking for the optimal freedom in board usage? A swivel board allows for a 90 degree left/right turn of the board creating the flexibility that may be necessary in confined areas.
Do you like ironing off the back of the board rather than the nose of the board? The swivel mechanism allows for the board to extend out of the cabinet and then turn left or right; this allows the back end of the board to be accessible and you now have the choice to iron off it.
This feature is standard on all models numbers beginning with an “A” which defines “Adjustable Swivel”.
Ventilated Metal Board
Our metal ventilated board differentiates itself from the earlier wooden ironing boards. The traditional built-in wooden board only needed to be hard for the dry irons of the day. Today’s advanced steam irons are designed to project bursts of steam to penetrate deep into the fabric. This allows for removing wrinkles with less effort. Yet, using them on a wooden ironing board caused a build-up of condensation on the board and hot spots when ironing. Our metal ventilated board allows steam to pass through the fabric keeping the surface dryer and providing a more even-heated ironing surface.
Reviews
There are no reviews yet.