Toll Free: (800) 536-9495
Monday - Friday: 8 AM - 4:30 PM CT

Messages by day

DateMessage Actions
1/1 A typical ironing board height is 34" to 36" from the floor. Knowing this will help you decide where to cut the opening from the floor when reading the specification chart.
1/2 Quick spray starch can be made a home by slowly adding 1 Tbls. Cornstarch to 2 cups water. Stir until the starch is dissolved. Pour into a clean spray bottle and spray fabrics lighting when ironing.
1/3 All IRON-A-WAY models are pre-assembled and ready to install. This means an easy installation for you.
1/4 Always keep moving freshly ironed surfaces away from you, this prevents newly formed wrinkles.
1/5 Electrical models are prewired. You simple connect the pigtailed wire located at the bottom of the electrical raceway with your incoming electrical wire.
1/6 To avoid flattening embroidery, iron them facedown on a thick towel.
1/7 Always predetermine if you want a swivel board or not. This feature is not a retrofit item and cannot be added later.
1/8 Did you know you can use paper clips to hold pleats in place when ironing?
1/9 A "No Door" option allows you to match your custom cabinetry. Remember the piano hinge and door hardware is not included when this option is selected.
1/10 You can use a cotton swab or pipe cleaner to remove the residue from the vents on the soleplate of your iron. This procedure helps prevents white mineral globs from suddenly spewing all over your best garment.