Kit necessary if planning to surface mount rather than installing between studs. 48” Trim Kit used if purchasing Model A-42, E-342, NE-342. No trim kit necessary for Model NE-242. Trim kit finishes out sides of unit for flush finish. Trim pieces can be stained or painted to match cabinet. Unit will protrude approximate 7” to 8” rather than 3” – 4” depending on which model purchased.

Kit necessary if planning to surface mount rather than installing between studs. 60” Trim Kit used for Model A-46 & AL-42. Trim kit finishes out sides of unit for flush finish. Trim pieces can be stained or painted to match cabinet. Unit will protrude approximate 7” to 8” rather than 3” – 4” depending on which model purchased.

The electrical cord cover or wrap allows you to only use the amount of cord required to iron. You can easily guide the iron and eliminate the excess cord from getting in your way. Electrical Cord Cover is standard on the Model A-46. The electrical cord wrap (image shown) is standard on the Model A-42.

...more than just a few garments to iron. The garment bar can hold multiple clothes hangers, making it more convenient to perform continuous ironing. This feature is standard on the Model A-46 and Model AL-42, not available on the Model NE-242 and optional on all remaining models.

...no place to leave your iron when moving or turning your garment? Place the iron in this handy heat resistant iron rest. This allows for more useable space on the ironing board while making your garment adjustments. This feature is standard on the Model A-46 and optional on all other models except the NE-242.

The rough-in kit is available for use prior to drywall being installed. Great for new construction or open wall reconstruction when remodeling. When drywall and trim have been completed, this kit also simplifies installation of your ironing center for your installer. Installation of your template can be completed in just a few easy steps. Your wall finisher is then ready to install drywall and can finish right up to the template. At a later date, the installer just removes the template and slides in the ironing center into the predetermined opening. It’s that easy!

All ironing centers ordered with no door option will come without door hardware. This situation usually occurs when a custom door is installed on the unit. Piano Hinge Assembly, garment hook, and roller catch assembly make up the door hardware and are available for purchase. 42” Piano Hinge Assembly consists of 39” Piano Hinge and sixteen #5 – 5/8” Phillips flat head screws.

All ironing centers ordered with no door option will come without door hardware. This situation usually occurs when a custom door is installed on the unit. Piano Hinge Assembly, garment bar, and roller catch assembly make up the door hardware and are available for purchase. 46” Piano Hinge Assembly consists of 49” Piano Hinge and twenty #5 – 5/8” Phillips flat head screws

All ironing centers ordered with no door option will come without door hardware. This situation usually occurs when a custom door is installed on the unit. Roller catch assembly, garment bar or garment hook, and piano hinge make up the door hardware and are available for purchase. Roller catch assembly consists of roller latch, strike plate, and four #8 – ½” sheet metal screws

Sleeve Board with Cover & Pad set. Silicone fabric cover. Solid wood construction. Ironing surface dimensions: Large Side - 16” x 5” - Small Side - 12” x 4” Great solution for ironing the sleeves of shirts or smaller garments that won’t fit over the nose of your regular ironing board. The sleeve board is not housed inside the unit. When not in use it must be stored in another location.